CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Fuel Door Release Cable: Service and Repair
Fuel Fill Door Opener Cable Replacement
NOTE:
-
When removing the clips, use a clip remover.
-
Take care not to bend the opener cable.
Remove the following parts, then pull the carpet back, as necessary.
-
Kick panel (left side)
-
Center pillar lower trim panel (left side)
-
Front side trim (left side)
-
Rear seat (left side)
-
Cargo area floor and cargo storage bin
-
Rear trim panel
-
Rear side trim panel (left side)
-
Rear side trim (left side)
Installation is the reverse of the removal procedure.
NOTE:
-
If necessary, replace any damaged clips.
-
Make sure fuel fill door opener cable is routed and connected properly.
-
Make sure the fuel fill door opens properly.