CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Hood Latch Release Cable: Service and Repair
Hood Opener Cable Replacement
NOTE:
-
When removing the clips, use a clip remover.
-
Take care not to bend the opener cable.
Remove:
-
Front wheelwell protector and inner fender
-
Front grille.
-
Kick panel.
Installation is the reverse of the removal procedure.
NOTE:
-
If necessary, replace any damaged clips.
-
Make sure the hood opener cable is routed and connected properly.
-
Make sure the hood opens properly.