CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
6. Remove the SRS unit covers.
7. '97 model: Cut areas (A) and (A) in the carpet, then pull the carpet back.
98 - 01 models: Release the fastener and cut area (B) in the carpet, then pull the carpet back.
8. Remove the clips, and release the fasteners, then remove the carpet.
NOTE: Take care not to damage, wrinkle, or twist the carpet.
9. Installation is the reverse of the removal procedure.
NOTE:
-
Take care not to damage, wrinkle, or twist the carpet.
-
Make sure the seat harness is routed correctly.
-
If necessary, replace any damaged clips.
-
Reattach the cut areas (A) and (B) ('97 model) or cut area (B) ('98 - 01 models) in the carpet with wire ties.