CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Power Door Lock Actuator: Service and Repair
CAUTION: Put on gloves to protect your hands.
NOTE: Take care not to scratch the tailgate door.
1. Remove:
-
Tailgate door panel
-
Rear hatch glass lock cylinder
2. Disconnect the connector and the connector clip. Remove the bolts securing the actuator, then remove the actuator.
NOTE: Take care not to bend the cylinder rod or damage the joint.
3. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure the cylinder rod and connector are connected properly.
-
Grease the joint of the cylinder rod.
-
Make sure the rear hatch glass opens properly.