CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
5. Remove the headrest guide and latch knob collar, then remove the seat-back frame.
6. Pull back the edge of the seat-back cover all the way around, release the clips, and remove the seat-back cover.
7. Installation is the reverse of the removal procedure.
NOTE:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and
clips.
-
Replace the released clips with new ones.
Seat cushion cover:
1. Remove the seat cushion
2. Remove the seat cushion latch and seat cushion strap.
