CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
7. Support the engine with a jack, then remove the upper bracket. Make sure to place a cushion between the oil pan and the jack.
8. Remove the cylinder head cover.
NOTE: Refer to Cylinder Head Assembly / Service and Repair / Installation for installing the cylinder head cover.
9. Remove the crankshaft pulley.
10. Remove the middle cover and lower cover. Do not use these covers to store removed items.
11. Mark the direction of rotation on the timing belt.
12. Loosen the adjusting bolt 180°. Push the tensioner to remove tension from the timing belt, then retighten the adjusting bolt.
13. Remove the timing belt.