CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Air Register: Service and Repair
Side Air Vent
Side Air Vent Removal and Installation
CAUTION:
-
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
-
Put on gloves to protect your hands.
NOTE: Take care not to scratch the dashboard and related parts.
1. Driver's side: Remove the power window switch.
2. Driver's side: Close the vent, and gently push out the clips from the power window switch opening by hand, then pull out the side air vent.
Disconnect the connector.
Passenger's side: Carefully insert a flat-tip screwdriver under the clips, then pull out the side air vent while prying up the clips.
3. Installation is the reverse of the removal procedure.