CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Blower Motor: Service and Repair
Removal and Installation
Replacement
1. Remove the evaporator.
2. Disconnect the connectors from the blower motor, the blower motor high relay, the power transistor and the recirculation control motor. Remove
the wire harness clip from the recirculation control motor, and release the wire harness from the clamp on the blower unit. Remove the mounting
bolts, the mounting nut and the blower unit.
3. Install in the reverse order of removal. Make sure that there is no air leakage.