CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Condenser HVAC: Service and Repair
Replacement
1. Recover the refrigerant with a recovery/recycling/charging station.
2. Remove the front grille.
3. Remove the coolant reservoir, but do not disconnect the reservoir hose from the coolant reservoir and the radiator.
4. Remove the bolts and the suction line bracket as shown. Remove the bolts and the upper mount brackets from the radiator.
5. Remove each bolt, then disconnect the discharge and condenser lines from the condenser. Plug or cap the lines immediately after disconnecting
them to avoid moisture and dust contamination.