CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Horn Relay: Testing and Inspection
Relay Test
Use this chant to identify the type of relay, then do the test listed for it.
NOTE: See turn signal/hazard relay input test.
Normally-open type B:
1. Check for continuity between the terminals.
-
There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.3 and No.4 terminals.
-
There should be no continuity between the No.1 and No.2 terminals when power is disconnected.
Type 1
-
Power window relay
-
Radiator fan relay
-
Condenser fan relay
-
A/C compressor clutch relay
-
Reverse relay (A/T)
