CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Coolant: Service and Repair
ENGINE COOLANT REFILLING AND BLEEDING
1. Slide the heater temperature control lever to maximum heat. Make sure the engine and radiator are cool to the touch.
2. Remove the radiator cap.
3. Loosen the drain plug, and drain the coolant.
4. Remove the drain bolt from the cylinder block.
5. Apply liquid gasket to the drain bolt threads, then reinstall the bolt with a new washer and tighten it securely.
6. Tighten the radiator drain plug securely.