CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Transmission Position Switch/Sensor: Service and Repair
WARNING: Make sure lifts, lacks and safety stands are placed properly.
1. Raise the front of the vehicle and support it with safety stands.
2. Set the parking brake and block both rear wheels securely.
3. Shift to [N] position.
4. Remove the A/T gear position switch connector from the connector bracket, then disconnect them.
5. Remove the A/T gear position switch harness clamp.
6. Remove the harness clamp from the right side cover, then remove the A/T gear position switch cover and A/T gear position switch.
7. Set the A/T gear position switch to [N] position. The A/T gear position switch clicks in [N] position.
