CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Heated Glass Element Relay: Testing and Inspection
Relay Test
Use this chant to identify the type of relay, then do the test listed for it.
NOTE: See turn signal/hazard relay input test.
Normally-open type A:
1. Check for continuity between the terminals.
-
There should be continuity between the No.1 and No.3 terminals when power and ground are connected to the No.2 and No.4 terminals.
-
There should be no continuity between the No.1 and No.3 terminals when power is disconnected.
-
Blower motor high relay
-
Rear accessory socket relay (M/T)
-
Blower motor relay
-
Rear window defogger relay
