CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Air Bag: Technical Service Bulletins
Driver's Air Bag - Replace Torx Bolts Properly
SOURCE:
Honda Service News September 2004
TITLE:
Replace Drivers Air Bag Torx Bolts Properly
APPLIES TO:
All Models
SERVICE TIP:
When replacing a drivers's side air bag, make sure you replace the torx bolts properly. When removing the bolts, use a high-quality bit, making sure the
bit is aligned. DON'T USE AIR TOOLS. When installing bolts, always start the bolts by hand to avoid cross-treading, and torque the bolts to the value
listed in the service manual.