CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
8. Disconnect the dashboard wire harness B 4P connector (1) from the cable reel, then disconnect the dashboard wire harness B 5P connector (2)
from the cable reel.
9. Release the tab (A), then remove the cable reel from the column.
Installation
1. Before installing the steering wheel, align the front wheels straight ahead.
2. If not already done, disconnect the battery negative cable, and wait at least 3 minutes.
3. Set the cancel sleeve (A) so the projections (B) are aligned vertically.
