Air Bag Control Module Specifications - CR-V SE 4WD L4-1972cc 20L DOHC MFI (2001)
4. Remove the left side cover from the SRS unit, then disconnect the SRS main harness 18P connector from the SRS unit.
5. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the driver's side.
6. Install the new SRS unit. If the Torx bolts you removed in the previous step have red threads, replace the Torx bolts.
7. Connect the SRS main harness 18P connector to the SRS unit; push it into position until it clicks.
8. Install the SRS unit covers (right and left). Make sure the covers snap together in the middle.
