CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Power Window Switch: Service and Repair
Power Window Switch Removal and Installation
CAUTION:
-
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
-
Put on gloves to protect your hands.
NOTE: Take care not to scratch the dashboard and related parts.
1. Remove the driver's dashboard lower cover.
2. Gently push out the power window switch from the dashboard lower cover opening by hand. Disconnect the connectors.
3. Installation is the reverse of the removal procedure.
NOTE: Make sure the connectors are connected properly.
