CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Starter Armature: Testing and Inspection
Armature Inspection and Test
1. Inspect the armature for wear or damage due to contact with the field winding. If there is wear or damage, replace the armature.
2. Check the commutator surface. If the surface is dirty or burnt, resurface with emery cloth or a lathe within the following specifications, or
recondition with #500 or #600 sandpaper.
3. Check the commutator diameter. If commutator diameter is below the service limit, replace the armature.
