CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
9. Install the right front mount. Tighten the mounting bolts in order: A and B.
10. Remove the vinyl type from the side frame (both sides).
11. Install the return hose joint by tightening the 16 mm flare nut.
12. Connect the return hose securely, and tighten the adjustable hose clamp.
13. Connect the pump outlet hose, and tighten the 14 mm flare nut.
NOTE: Make sure that there is no interference between the fluid lines, the rear beam or any other parts.
14. Center the steering rack within its stroke.
15. Install the steering joint, and reconnect the steering shaft and pinion shaft.
NOTE: Make sure the steering joint is connected as follows.