CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
1. Loosely install the damper on the frame with the aligning tab facing inside, then loosely install the two flange nuts.
2. Install the damper fork over the driveshaft and onto the lower arm. Install the front damper in the damper fork so the aligning tab is aligned with
the slot in the damper fork.
3. Loosely install the damper pinch bolt on the top of the damper fork.
4. Loosely install the damper fork bolt and a new self locking nut on the bottom of the damper fork.
5. Raise the knuckle with a floor jack until the vehicle just lifts off the safety stand.
WARNING: The floor jack must be securely positioned or personal injury may result.
6. Tighten the damper pinch bolt.
7. Tighten the damper fork bolt and self-locking nut.
8. Tighten the flange nuts on top of the damper.
9. Install the brake hose mounts with the brake hose mounting bolts.
10. Install the front wheel.
