CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
9. Remove the 12 mm flange bolts.
10. 4WD: Remove the backing plate hub bearing unit from the rear axle with a puller if necessary.
11. Separate the rear hub from the hub bearing unit using the special tools and a press.
Note the following items during disassembly:
-
Take care not to distort the backing plate.
-
Hold on to the hub to keep it from falling when pressed clear.
12. Press the wheel bearing inner race from the hub using the tools, a bearing separator, and a press.