CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Pressure Plate: Testing and Inspection
REMOVAL/INSPECTION
1. Check the diaphragm spring fingers for height using the special tools and a feeler gauge.
Standard (New): 0.6 mm (0.02 inch) max.
Service Limit: 0.8 mm (0.03 inch)
If the height is more than the service limit, replace the pressure plate.
2. Install the special tools as shown.
3. To prevent warping, unscrew the pressure plate mounting bolts in a crisscross pattern in several steps, then remove the pressure plate.
4. Inspect the pressure plate surface for wear, cracks, and burning.
