CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Wiper Motor: Testing and Inspection
Rear Window Wiper Motor Test
Rear Window Wiper Motor Test
1. Remove the tailgate trim panel.
2. Disconnect the 4P connector from the wiper motor assembly.
3. Test the motor by connecting battery power to the No.1 terminal, and ground to the No.3 terminal.
If the motor does not run or fails to run smoothly, replace it.
4. Reconnect the 4P connector to the wiper motor.
5. Connect an analog voltmeter between the No.4 (+) and No.2 (-1 terminals.
6. Run the motor by turning the wiper/washer switch ON.
The voltmeter should alternately indicate 0 V and 11 V or less.
