Crosstour 4WD V6-3.5L (2010)
Intake Manifold Cover Gasket:
P/N 17146-R70-A01
Intake Manifold Gasket (Pilot 4WD, Accord):
P/N 17105-RCJ-A01
Intake Manifold Gasket (Pilot 2WD, Odyssey):
P/N 17105-RCA-A01
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation Number:
11 00A1
Flat Rate Time:
2.7 hours
Failed Part:
P/N 14632-R70-A01
Defect Code:
07405
Symptom Code:
09117
Skill Level:
Repair Technician
DIAGNOSIS
NOTE:
If you are viewing this service bulletin on ISIS and the computer has sound, click the image below to hear an example of the noise.
1. Start the engine, and let it reach normal operating temperature.
2. While the engine is idling, listen for a knock or tick. Use a stethoscope to find the location of the noise.
^
If you hear knocking or ticking from either cylinder head, go to REPAIR PROCEDURE.
^
If you hear a noise coming from another location, continue with normal troubleshooting.
REPAIR PROCEDURE
1. Remove both cylinder head covers:
^
Refer to Cylinder Head Cover Removal in Section 6 of the appropriate service manual, or
^
Online, enter keywords COVER REM, then select the appropriate Cylinder Head Cover Removal procedure from the list.