CRX L4-1488cc 1.5L SOHC (EW1) 3V Carb (1986)
1. Extend the end of the cable housing 5 mm (1/5 in.) from the end of the clamp boss and snap the housing into the clamp
2. Connect the cable end to the arm on the water valve thru-shaft.
3. Slide the temperature control lever to COLD. Close the water valve fully, then connect the water valve cable end to the valve arm, and snap the
cable housing into the clamp as shown.
4. Install the water valve cover with the "UP" mark toward up.