honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Service Specifications *|Page 960 > < Service Specifications *
Page 1
background image

Idle Speed: Specifications
Controlled Idle Speed

Controlled Idle Speed [1]

Idle Speed [2]

750 ± 5O rpm

Idle Speed [3]

780 ± 5O rpm

NOTE: If disconnected for base idle adjustment, connect the 2P connector on the  Electronic Air Control Valve (EACV), then remove HAZARD
fuse in the main fuse box for 10 seconds to reset ECU before checks. 

[1] Idle the engine with no-load conditions in which the headlights, blower fan, rear defogger, cooling fan, and air conditioner are not operating for

one minute, then check the idle speed against image table. 

[2] Idle the engine for one minute with headlights (HI) and rear defogger ON and check the idle speed. 

[3] Idle the engine for one minute with heater fan switch at HI (right end) and air conditioner ON, then check the idle speed.

Service Specifications *|Page 960 > < Service Specifications *