Del Sol L4-1.5L SOHC (1993)
Front Door Window Regulator: Service and Repair
Glass/Regulator Replacement
1. Remove:
^
Door panel
^
Plastic cover
^
Outer molding
2. Remove the mounting nuts, then remove the stopper plates.
NOTE: Scribe a line around the mounting nuts to show the original adjustment.
3. Move the window until you can see its mounting bolts. Carefully remove the bolts while holding the glass.
4. Carefully pull the glass out through the window slot.
NOTE: Take care not to drop the glass inside the door.
5. Remove the mounting screw, then remove the glass run channel.
6. Remove the mounting screw, nut and bolts. Slide the front glass guide to the rear, then remove it.
NOTE:
^
When installing the glass run channel, take care not to twist it. Make sure the glass run channel is fastened securely as shown.
^
When installing the front glass guide, tighten the mounting screw, then install the mounting bolt temporarily. Align the front glass guide
properly, then tighten the mounting bolts.
