honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sunroof / Moonroof > < Body - Water Leak From Roof and Door Window Area|Page 5891
Page 58
background image

inside of the door with your knee; then pull the top of the quarter glass window frame toward you with firm, slow pressure.

41.

Re-position the wooden block on the striker, and measure the distance. The distance should be 1 mm less than the original measurement.

42.

Once the distance is correct, water test the area to check for leaks.

Final Adjustments After Repair and Warranty Claim Info

FINAL ADJUSTMENTS AFTER REPAIR

If some water leaks persist after performing all the necessary repairs, perform the final adjustments for the following areas:

A slight leak at the top of door glass, at the run channel -

1.

Increase the glass height 0.5 - 1.0 mm (see step 11).

2.

Increase the quarter glass window camber 0.5 - 1.0 mm (see step 38).

A slight leak from the A pillar weatherstrip and roof side seal area -

1.

Readjust the roof side seal for flush fit to the A pillar weatherstrip (see step 16).

2.

Readjust the roof side seal to increase seal tension on the A pillar weatherstrip (see step 34).

WARRANTY CLAIM INFORMATION

In warranty:
The normal warranty applies.

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request
consideration, and get the DSM's decision, before starting work.

Failed part:
P/N 72320-SR2-003 
H/C 4016838

Defect code:
059

Contention code:
B06

Sunroof / Moonroof > < Body - Water Leak From Roof and Door Window Area|Page 5891