Del Sol L4-1.5L SOHC (1993)
Brake Pad And Pad Retainer Inspection
9. Make sure that the brake pad retainers and brake pads are in their original positions.
Caliper Installation
10. Install the caliper onto sleeve A, pivot it down into position.
NOTE: Install the pin boot into the groove in the caliper.
11. Connect the brake hose to the caliper with new sealing washers and tighten the banjo bolt.
Torque Caliper Bolt
12. Tighten the caliper bolt B.
13. Fill the brake reservoir up and bleed the brake system, refer to Brakes and Traction Control/Brakes/Service and Repair.
14. After installation, check for leaks at hose and line joints or connection, and retighten if necessary.
