honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Main Switch Test/Replacement|Page 6060 > < Main Switch Test/Replacement
Page 1
background image

Cruise Control Main Switch: Testing and Inspection
Set/Resume Switch Test/Replacement

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming

procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

2. Disconnect battery ground cable, then the positive cable.
3. Ensure wheels are in straight ahead position, then remove lower instrument panel cover.

Fig. 37 Test Harness "C" Installation. W/Air Bag

4. Disconnect cable reel harness 6-P connector from air bag harness, then connect test harness C only to cable reel harness, Fig. 37.

Fig. 38 Set/Resume Switch Test. W/Air Bag

5. Check for continuity between terminals of test harness C in each switch position, Fig. 38.

Main Switch Test/Replacement|Page 6060 > < Main Switch Test/Replacement