Del Sol L4-1.5L SOHC (1993)
Radiator Cooling Fan Temperature Sensor / Switch: Testing and Inspection
1. Drain cooling system and remove cooling fan temp switch from the thermostat housing.
2. Connect suitable ohmmeter between sensor terminals.
3. Heat thermo sensor in suitable solution while observing ohmmeter.
4. Meter should indicate continuity when temperature reaches 190-0.03degreesF.
5. Allow sensor to cool while observing meter. Meter should indicate no continuity as temperature drops below approximately 182-188degreesF.
6. If sensor fails to operate as outlined, sensor is defective.
