honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Air Door Cable: > < A/C - Temperature Control Lever is Hard to Move|Page 4655
Page 5
background image

10.

Hook the end of the new air mix cable to the temperature control lever. Push the cable housing into the holder until it locks in place.

11.

Remove the main cam link.

12.

Apply a small amount of MH62 grease to the shaft and slot of the new main cam link. Install the new link on the shaft.

13.

Reinstall the main cam lever and the link rod.

14.

Reinstall the heater control panel in the dashboard.

15.

Reinstall the radio and center lower cover.

16.

Connect and adjust the air mix control cable and the heater valve cable. (Refer to section 21 of the appropriate service manual.)

17.

Make sure that the temperature control lever moves easily.

18.

Reconnect the battery. Enter the anti-theft code in the radio (if needed), and set the radio preset buttons. Set the clock.

REQUIRED MATERIALS

MH62 grease: 
P/N 08798-9012-1, H/C 4562187

PARTS INFORMATION

Air mix control cable:
P/N 79542-SR1-A01, H/C 3892965
 
Main cam link: [NEW]
P/N 79111-SR3-A00, H/C 4704607

All Technical Service Bulletins for Air Door Cable: > < A/C - Temperature Control Lever is Hard to Move|Page 4655