honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sensors and Switches - Starting and Charging > < Impact Sensor|Testing and Inspection|Page 701
Page 3
background image

Removal Of The Short Connector

4. Remove the short connector from the airbag. Reconnect the airbag connector to the cable reel connector. Attach the short connector to the access

panel, then reinstall the panel.

5. Reconnect the battery positive cable, then the negative cable.
6. After installing the dash sensor, confirm proper system operation: Turn the ignition to II; the instrument panel SRS indicator light should go on for

about 6 seconds and then go off.

Sensors and Switches - Starting and Charging > < Impact Sensor|Testing and Inspection|Page 701