honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Mitsubishi Alternator|Page 3959 > < Mitsubishi Alternator|Page 3957
Page 1
background image

Rectifier Diode / Bridge: Service and Repair

Alternator Disassembly

1. Remove the four through bolts.

Removal Of The Alternator Rear Housing

2. Heat the rear bearing seat with a heat gun for a few minutes (122-140 °F, 50-60 °C).

Separating The Alternator Case

3. Separate the rear housing from the drive end housing by inserting a flat tip screwdriver into the openings and prying them apart. Take care not to

damage the stator with the tip of the screwdriver.

Mitsubishi Alternator|Page 3959 > < Mitsubishi Alternator|Page 3957