Del Sol L4-1.5L SOHC (1993)
Ignition Lock: Service and Repair
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures. On models
equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures.
2. Disconnect battery ground cable.
3. Remove instrument panel lower cover and knee bolster.
4. Disconnect ignition switch connectors, then remove steering column covers.
5. Remove column holder mounting bolts and nuts, then lower steering column assembly.
6. Center punch each of two shear screw heads, then use suitable drill and drill bit to remove screw heads and the switch.
7. Install new switch without ignition key inserted.
8. Hand tighten shear screws, then insert ignition key and check for proper operation of wheel lock.
9. Tighten shear screws until hex heads twist off.
10. Raise steering column assembly, then install column holder mounting bolts and nuts.
11. Reconnect switch connectors.
12. Position switch wiring and install steering column covers.
13. Install dashboard lower cover and knee bolster.
14. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures. On models
equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures.
