Del Sol L4-1.5L SOHC (1993)
14. Remove the cotter pin and castle nut. Install the 10mm hex nut on the ball joint.
15. Once the hex nut is flush with the ball joint pin end, use SST # 07MAC-SL00200 or equivalent and separate the tie-rod ball joint and knuckle.
Caution: Take care not to damage the ball joint dust boot.
16. Disconnect the three lines from the valve body unit on the steering gearbox and immediately seal the hoses AND pipes to prevent contamination.
17. Remove the left tie-rod end, then slide the rack all the way to the right.
18. Remove the steering gearbox mounting bolts.
