honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Steering Wheel|Removal|Page 4441 > < Airbag Handling and Storage|Page 4438
Page 1
background image

Steering Wheel: Service and Repair
Removal

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming

procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

2. Remove air bag assembly as follows:

a. Remove mounting screw covers.
b. Remove mounting screws using T30 Torx bit.
c. Disconnect electrical connectors, then remove air bag assembly. When storing a removed air bag assembly, ensure pad is facing upward.

3. On models less air bag, remove steering wheel emblem.
4. Ensure steering wheel is in a straight ahead position, then remove steering shaft nut or bolt.
5. Remove steering wheel by rocking it from side to side while pulling steadily with both hands.

Steering Wheel|Removal|Page 4441 > < Airbag Handling and Storage|Page 4438