honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Lock-Up Control Solenoid Valve A/B <--> [Torque Converter Clutch Solenoid, A/T] > < Recall 94V063000: Shift Cable Retainer Replacement|Page 3467
Page 1
background image

Throttle Valve Cable/Linkage: Adjustments

Fig. 9 - Throttle Control Lever

Before adjusting the throttle control cable ensure engine is at normal operating temperature, cable free play and idle speed are correct.

1.

Verify throttle linkage is in full closed position.

2.

Loosen locknut of throttle control cable at throttle linkage.

3.

Remove free play of throttle control cable with locknut, while pushing throttle control lever to full closed position, Fig. 9.

4.

Tighten locknuts, then inspect synchronization and throttle control lever movement.

Lock-Up Control Solenoid Valve A/B <--> [Torque Converter Clutch Solenoid, A/T] > < Recall 94V063000: Shift Cable Retainer Replacement|Page 3467