Del Sol L4-1.5L SOHC (1993)
Case: Service and Repair
REMOVAL
NOTE: Place the clutch housing on two pieces of wood thick enough to keep the mainshaft from the hitting the workbench.
1. Remove the back-up light switch.
2. Remove the transmission hanger B.
3. Loosen the transmission housing attaching bolts in a criss-cross pattern in several steps, then remove them.
4. Remove the 32 mm sealing bolt.
5. Expand the snap ring on the countershaft ball bearing and remove it from the groove using a pair of snap ring plier.
