honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Mainshaft Bearing/Bushing, M/T|Service and Repair|Page 3597 > < Synchronizer Ring, M/T|Service and Repair
Page 1
background image

Mainshaft Bearing/Bushing: Service and Repair

1. Remove the ball bearing using the special tools.

2. Remove the oil seal from the clutch housing.

3. Drive the new oil seal into the clutch housing using the special tools as shown.

Mainshaft Bearing/Bushing, M/T|Service and Repair|Page 3597 > < Synchronizer Ring, M/T|Service and Repair