Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1705001.png)
Power Door Lock Actuator: Testing and Inspection
Driver's Door
1. Remove the driver's door panel.
2. Disconnect the 6P connector from the actuator.
Driver's Door Lock Actuator Test
3. Check actuator operation by connecting power and ground according to the table.
Driver's Door Lock Actuator Test
CAUTION: To prevent damage to the actuator, apply battery voltage only momentarily.
^ If the actuator fails to work properly, replace it.
