Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
3. Install the rocker arms while inserting the rocker arm shaft into the cylinder head.
NOTE: Remove the rubber band after installing the rocker arms.
4. Clean and install the rocker shaft orifices with new O-rings. If the holes in the rocker arm shaft and cylinder head are not in line with each other,
screw a 12 mm bolt into the rocker arm shaft and rotate the shaft.
NOTE: The shapes of the rocker shaft orifices for the intake and exhaust are different. The orifices must be installed in the original locations.