honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Service Tips|Page 1538 > < Service Tips|Page 1536
Page 3
background image

8. After inspection, check that the does not come on.

Manual Inspection

1. Set the No. 1 piston at TDC.
2. Remove the ignition wire cover and the ignition wires.

3. Remove the ignition wire clamps while pulling up on the lock.
4. Remove the cylinder head cover.
5. Push the mid rocker arms on the No. 1 cylinder manually.

6. Check that each mid rocker arm moves independently of the primary and secondary rocker arms.
7. Check the mid rocker arms of each cylinder at TDC.

Service Tips|Page 1538 > < Service Tips|Page 1536