honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Door Switch > < Diagram Information and Instructions|Page 6781
Page 2
background image

Controller Input Test

3.  Inspect the connector terminals to be sure they are all making good contact.

^  If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
^  If the terminals look OK, make the following input tests at the terminals.

If any test indicates a problem, find and correct the cause, then recheck the system.

If all input tests prove OK, the dash lights brightness controller must be faulty; replace it.

Door Switch > < Diagram Information and Instructions|Page 6781