Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-375001.png)
Wheel Bearing: Testing and Inspection
1. Raise the car off the ground, and support it with safety stands in the proper locations.
2. Remove the wheels, then reinstall the wheel nuts.
Front
Rear
3. Attach the dial gauge as shown. Front/Rear: Standard: 0 - 0.05 mm (0 - 0.002 inch)
4. Measure the bearing end play by moving the disc in or outward.
5. If the bearing end play measurement is more than the standard, replace the wheel bearing.
