Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
Shift Interlock Solenoid: Testing and Inspection
Shift Lock Solenoid Test
1. Remove the console, then disconnect the 2P connector of the shift lock solenoid from the main wire harness.
NOTE: Do not connect power to the B (-) terminal (reverse polarity) or you will damage the diode inside the solenoid.
Shift Lock Solenoid Test/Replacement
2. Connect battery power to the A terminal, ground the B terminal momentarily, and check solenoid operation.
-
If the solenoid does not operate, replace it as described in steps 3, 4, and 5.
-
If the solenoid operates, check and, if necessary, adjust its two positions as shown in step 5.
3. Remove the shift lock collar and the solenoid pin.
Shift Lock Solenoid Test/Replacement
4. Remove the self-locking nuts and shift lock solenoid, then install the new solenoid in the reverse order of removal.
5. Check and, if necessary, adjust the solenoid's position.