Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1418001.png)
Power Steering Valve: Service and Repair
Assembly
NOTE:
-
Clean the disassembled parts with solvent, and dry them with compressed air. Do not dip the rubber parts in a solvent.
-
Always replace the O-rings and rubber seals with new ones before assembly.
-
Apply power steering fluid or steering grease (HONDA P/N: 08733 - B070E) to the parts indicated in the assembly procedures.
-
Do not allow dust, dirt, or other foreign materials to enter the power steering system.
-
Use the appropriate special tools where necessary.
