honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Steering Valve|Removal|Page 5242 > < Power Steering Valve|Removal|Page 5240
Page 4
background image

15. Install the TWC with the new gaskets and new sell locking nuts. 
16. Connect the shin linkage.

a. Connect the shift rod to the transmission and drive the spring pin with punch, then install the pin retainer. Be sure that the projection on the pin

retainer is in the hole.

b. Install the extension rod on the transmission case.

Power Steering Valve|Removal|Page 5242 > < Power Steering Valve|Removal|Page 5240