honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sensors and Switches - Steering > < Power Steering Valve|Removal|Page 5242
Page 6
background image

the nut by loosening.

23. Fill the system with recommended power steering fluid and bleed air from the system.
24. After installation, perform the following checks.

a. Check the gearbox for leaks.
b. Adjust the front toe.
c. Check the steering wheel spoke angle. Adjust by turning the right and led tie-rods, if necessary.

NOTE:  Turn the right and led tie-rods equally.

Sensors and Switches - Steering > < Power Steering Valve|Removal|Page 5242