Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
6. Fit the rollers to the spider with their high shoulders, facing outward.
NOTE:
-
Reinstall the rollers in their original positions on the spider by aligning the marks.
-
Hold the driveshaft pointed up to prevent the rollers from falling off.
7. Pack the inboard joint with the joint grease included in the new driveshaft set. Grease quantity: 120 - 130 g (4.2 - 4.6 oz)
8. Fit the inboard joint onto the driveshaft.
NOTE:
-
Reinstall the inboard joint onto the driveshaft by aligning the marks on the inboard joint with the marks on the rollers.
-
Hold the driveshaft pointed up to prevent the inboard joint falling off.